Fuse Termiticide/Insecticide is used for the control of ants (acrobat argentine, big-headed, caribbean crazy, carpenter, crazy, odorous, pavement and thief), asian lady beetles, darkling beetles, cellar spiders, boxelder bugs, pill bugs, cluster flies, european earwigs, house crickets, millipedes, silverfish and termites.,
For Use In
Fuse Termiticide/Insecticide is for use on outside surfaces of listed structures, wall voids, outside perimeter of structures and building construction.,
For subterranean termite control, specific treatment recommendations may differ due to regulations, treatment procedures, soil types, construction practices and other factors. The purpose of chemical soil treatment for termite control is to establish a continuous treated zone (horizontal and/or vertical) between the wood and other cellulose material in the structure and the termite colonies in the soil. Follow all federal, state, and local regulations and treatment standards for protection of a structure from termites. The establishment of an aerial or above ground colony may require additional treatments to control the termites, as well as landscape modifications, and/or structural repairs to deny termites of a moisture source. Use a 0.067% to 0.13% dilution based on current recommendations.
For a typical control situation, a 0.067% dilution is used. A 0.13% dilution may be used when a severe or persistent infestation exists
If used according to the label each bottle of Fuse Termiticide/Insecticide will treat 240 linear feet.
Time to Kill
Fuse Termiticide/Insecticide will begin killing insects immediately and provide years of insect protection when applied properly
Country of Manufacture
Follow this procedure for mixing Fuse Insecticide:
1. Fill tank to 1/3 full. 2. If using large sprayer, start pump to begin bypass agitation and place end of treating tool in tank to allow circulation through hose. 3. Add appropriate amount of FUSE Termiticide/Insecticide. 4. Add remaining amount of water.
Imadicloprid 21.4%, Fipronil 6.6%