KILLS: Termites* (including subterranean drywood, dampwood
and arboreal), Wood Destroying Insects (Powder Post Beetles, Old
House Borer, Wharf Borer), Ants (Including: Argentine, Ghost, WhiteFooted,
foraging Carpenter; Excluding: Fire, Harvester, Leaf cutter and
Pharaoh), Asian Lady Beetles, Boxelder Bugs, Cluster Flies, Elm Leaf
Beetles, Bean Plataspids (including Kudzu Bug), Brown Marmorated
For Use In
FOR USE IN AND AROUND STRUCTURES AND LIMITED OUTDOOR
SPOT TREATMENTS: Apartments, Homes, Food/Feed Handling
Establishments (non-food/feed areas), Restaurants, Hospitals
and Nursing Homes (Non-patient Areas), Hotels, Motels, Hobby
Greenhouses, Interiorscapes, Office Buildings, Schools**,
Transportation Equipment (Buses, Cargo Trucks, Trailers, Trains),
Warehouses and Other Commercial and Industrial Buildings
Remove the outer cap and snap the actuator into place. Remove the finger pad cover. After using, replace the finger pad cover. When the can is empty, remove the actuator from the can and use it on another can.
DIRECTIONS FOR USE before using FIPRO AEROSOL. Shake well before using. This product is a ready-to-use termiticide/insecticide formulation. When FIPRO AEROSOL is sprayed, the product rapidly expands generating a dry foam with an expansion ratio of approximately 30:1, with 1 oz (28 g) of product being dispensed in approximately 5 sec producing approximately 1 qt (946 ml) of foam.
FIPRO AEROSOL can be used to control insects where they are found or suspected; including: in nests, galleries, harborages and voids. FIPRO AEROSOL can be applied in and around commercial and residential structures as well as structural and non-structural elements that can potentially be attacked by, or provide harborage to, insects. Applications of FIPRO AEROSOL can be made from the interior and/ or exterior. Drilling of hole(s) may be necessary to access galleries or harborages. Treatment of insect harborages associated with utility poles, fences, bridges, landscape timbers, under slabs or other non-structural elements is permitted with FIPRO AEROSOL. TREATMENT OF INSECT GALLERIES, HARBORAGES OR VOIDS: Use sufficient foam to treat the known or suspected insect harborages. After applying FIPRO AEROSOL, hold the injector tip in place for approximately 8 sec to allow the product within the injector tube to dispense into the treatment area. Drilling hole(s) may be required to access the known or suspected gallery, harborage or void. Drill hole(s) at 1 or more locations along the gallery, harborage or void for proper treatment. Use of a moisture meter may help to determine the spread of a treatment. FIPRO AEROSOL can be used as a localized treatment for the control of existing infestations of subterranean termites and other wood destroying insects, or as a supplemental treatment in a structural protection program.
FIPRO AEROSOL is intended for use on localized wood destroying insect infestations only. The purpose of localized applications is to kill wood destroying insects which may be present in the treated channels at the time of treatment. Localized applications are intended as supplemental treatments and not a substitute for: mechanical alteration, soil treatment, or foundation treatment. FIPRO AEROSOL should not be used as a stand-alone treatment for structural protection. Reapplication Interval for FIPRO AEROSOL: This product may be applied to previously treated sites if activity is found 30 days after previous application.