Shopping Cart Summary

 

Total: $0.00

Continue Shopping
Vector Plasma Insect Light Traps BASF

    Vector Plasma Insect Light Traps BASF

    Rating: Not yet rated
    Review(s) | Write a Review
    (0) Q&A's | Learn More
    Original Price: $224.99
    Our Price: $205.99 - $217.99
      Size/Description Price Qty
    A No Screen $205.99 A No Screen $205.99 $205.99
    B Screened $217.99 B Screened $217.99 $217.99

    You may also need the following:

    Universal Replacement Glue Boards Universal Replacement Glue Boards
      $35.00
    Total Price:$0.00
    Product code: 3013

    Achieve rapid fly control in production and storage areas of large commercial facilities and back-of-house areas of restaurants and commercial kitchens with this fast-acting unit.

    The Vector Plasma is quick, sleek, light weight and delivers 72-watts of insect attraction.

    The Lift & Service cover makes service and maintenance a snap.

    Maximum Fly control in production and storage areas of large commercial facilities

    Vector Installation Brochure

    Customer Comments:

    The Vector Plasma works GREAT! Love it!

    Alan

    Achieve rapid fly control in production and storage areas of large commercial facilities and back-of-house areas of restaurants and commercial kitchens with this fast-acting unit. The Vector Plasma is quick, sleek, light weight and delivers 72-watts of insect attraction.

    The Lift & Service cover makes service and maintenance a snap.

    3 year warranty (excluding bulbs and glue) Whitmire Micro-Gen developed the Vector Plasma as the brightest wall mounted Insect trap on the market with the quickest catch rate.

    The extruded aluminum construction is both durable and great looking. The Vector Plasma Fly Light can be used for monitoring insect populations and can be placed in food handling areas.

    Each Vector Plasma fly light trap utilizes ultraviolet light to lure the insect to the trap where it becomes trapped onto a glue surface. There are no exploding of insect parts, the flying insects are trapped fully intact.The Vector Plasma is an ideal fly trap for use in both sensitive areas and locations with heavy fly pressure. Sensitive areas with a zero tolerance for flies will appreciate the quick catch stemming from the high UV output (72-watts). Areas with high fly pressure will see quick relief and reap the benefits of two high-capacity black camouflaged glueboards. Vector meets all PDA and USDA guidelines and it may be placed in and around food preparation areas.

    Includes 1 Trap, 2 Bulbs, and 1 Glue Pad

    Best Fly control in production and storage areas of large commercial facilities.

    • The brightest Vector at 72 Watts of power
    • These insect traps are ideal for large areas or where very heavy fly pressure exists
    • Dual glue boards provide large catch area
    • Ideal for large indoor commercial areas: Food processing Areas, Production areas, Packaging Areas, Warehouse, commercial kitchens.

    Dimensions:

    Length 21

    Width 2.5

    Height 12.5

    Used for Control of:

    • Bottle Fly
    • Cluster Fly
    • Flesh Fly
    • Fruit Fly
    • Fungus Gnat
    • House Fly
    • Moth Fly
    • Phorid Fly

      Here are some Maintenance and troubleshooting recommendations:

      If either or both bulbs glow dark purple (indicating a burned out bulb):

      Follow procedure for replacing bulbs

      Retain burned out bulb and contact BASF Pest Control Solutions at 800-777-8570 for evaluation and replacement if it has failed prematurely (prior to 12 months service)

      If both bulbs are not glowing (no illumination at all), reset the safety circuit:

      The electronic ballast in the Vector Plasma has a safety circuit which temporarily shuts down the unit when an electrical surge occurs; this feature protects service personnel and the integrity of the unit

      Traps in shut down phase may appear to be defective or may give the false impression that the bulbs are burnt out

      Common causes:

      Bulbs are replaced without first unplugging the Vector Plasma unit

      Unit is exposed to extreme wet conditions

      Power surge occurred in building

      Unit must be reset to resume normal operation

      How to Replace the Bulb Retention Clip

      Clip replacement procedure:

      1) Unplug the unit from the electrical outlet

      2) Remove bulb

      Remove the bulb from the bulb retention clip by gently pulling it free

      Press the red bulb ejector button on the receptacle, grasp the bulb at the base, pull free from the receptacle

      3) Remove unit from wall

      4) From the back side of the unit, squeeze the exposed plastic tabs on clip and push through to the front of the unit

      5) Insert the base of the replacement metal clip into the front clip opening so that the clip arms are vertical to each other

      6) Re-install bulb

      Gently snap replacement bulb into retention clip

      Align base of bulb so that the base rests flush against the receptacle (with no gap)

      Press the base along the receptacle so that all 4 prongs click securely into the receptacle

      7) Mount on wall and plug unit into electrical outlet

    Available Options: Option A and Option B Screened

    Customer Reviews

    Average Customer Review: Not yet rated
    Write an online review and share your thoughts with others.
    There are no reviews
    Be the first to ask a question about this product.

    Be the first to ask a question about this product.

    epestsolutions is an Upfront Merchant on TheFind. Click for info.