For broad spectrum residual control of crawling, flying and wood-infesting insect pests, indoors and outdoors.
Optashield CS is intended for use as a general surface, spot, Crack & CreviceŽ or void application in, on and around buildings and structures and their immediate surroundings and in
trucks, trailers and other transportation vehicles.
PERMITTED AREAS OF USE INCLUDE:
Dairy Areas, Milk Rooms, Calf Hutches, Calving Pens and Parlors, Poultry Houses, Hog Barns, Horse Barns, Dog Kennels, Homes, Trucks/Trailers, Warehouses and Other Commercial
and Industrial Buildings.
Recommended for use by commercial applicators
For broad spectrum residual control of crawling, flying, and wood infesting insect pests, indoors and outdoors
For use on and around buildings and structures and their immediate surroundings and on trucks and trailers and other transportation vehicles
Optashield CS is a liquid capsule suspension containing 6% of
cyfluthrin which will provide extended residual control of the
pests listed on this label. This product may be applied using
compressed air, backpack, or power spray equipment. Thoroughly
clean spray equipment before using this product. Shake
concentrate well before mixing. First add approximately
one-half the required water to the tank, then add the proper
amount of Optashield CS. Agitate, add the remaining water and
thoroughly agitate the solution again. When emptying the
bottle, triple rinse with water and add the rinsate to the spray
tank. Continue to agitate solution occasionally during use to
ensure even coverage. Shake or re-agitate solution if spraying
is interrupted or if dilution is left in sprayer overnight. If spray
screens are used they should be 50 mesh or larger. Water may
be used at temperatures up to 160°F.
Optashield CS may be sprayed on any surface which will not be
damaged or stained by water. Heavy applications may leave a
visible deposit. On some surfaces this deposit can be removed
with a damp cloth or sponge.
Do not apply this product through any type of irrigation system
and do not formulate this product into other end-use products.