Dominion 2L with Imidacloprid is a non-repellent termite treatments, meaning that termites unknowingly enter a treated zone of applied chemical. Applied to soil, Dominion 2L insecticide creates a protective zone that has been treated between termites in the soil and wood in your home. Other repellent termite control products rely on a complete barrier to be effective - one small gap in the treatment and termites will find it. Dominion 2L works by killing termites, not repelling them. Its unique chemistry binds to soil and won't wash away.
Product Code: dominion
4 Bottles (1 case)
724.6 ml(27.5 oz.)-Yields 50-100 gallons
Dominion 2L gets rid of termites in several ways. First, termites are eliminated as they ingest or contact Dominion/Premise in the zone that has been treated.. Second, termites transfer Dominion 2L/ through social interaction and cannibalism. Termites survive as a colony and are in constant contact with each other. .
APPLICATION AS A TERMITICIDE
DOMINION 2L TERMITICIDE/INSECTICIDE may be used in and around structures and building construction to prevent and control termite infestations.
GENERAL USE INSTRUCTIONS
For subterranean termite control, specific treatment recommendations may differ due to regulations, treatment procedures, soil types, construction practices and other factors.
The purpose of chemical soil treatment for termite control is to establish a continuous chemical treated zone (horizontal and/or vertical) between the wood and other cellulose material in the structure and the termite colonies in the soil. Follow all federal, state, and local regulations and treatment standards for protection of a structure from termites. The establishment of an aerial or above ground colony may require additional treatments to control the termites, as well as landscape modifications, and/or structural repairs to deny termites of a moisture source. Use a 0.05% to 0.1% dilution based on current recommendations. For a typical control situation, a 0.05% dilution is used. A 0.1% dilution may be used when a severe or persistent infestation exists..
When treating adjacent to an existing structure, the applicator must check the area to be treated, and immediately adjacent areas of the structure, for visible and accessible cracks and holes to prevent any leaks or significant exposures to persons occupying the structure. People present or residing in the structure during application must be advised to remove their pets and themselves from the structure if they see any signs of leakage. After application, the applicator is required to check for leaks. All leaks resulting in the deposition of termiticide in locations other than those prescribed on this label must be cleaned up prior to leaving the application site. Do not allow people or pets to contact contaminated areas or to reoccupy contaminated areas of the structure until the clean up is completed.
Structures that contain wells or cisterns within the foundation of the structure can only be treated using the treated backfill method described in the treatment around wells and cisterns section of this label. Consult state and local specifications for
recommended distances of wells from treated area, or if such regulations do not exist, refer to Federal Housing Administration Specifications (H.U.D.) for guidance.
MIXING: Refer to MIXING TABLE for correct amount of DOMINION 2L TERMITICIDE/INSECTICIDE to be used.
Dominion 2L Termiticide Insectide Concentrates
Dominion 2L is great for trenching and soil treatment.
Also used for treating wood and wall void foaming.
Termites do not detect Dominion .
Since Dominion 2L is non-repellents, termites can't detect them; instead, they come directly in contact with the active ingredient, - imidacloprid. Once exposed to Dominion or Premise the termites stop feeding and die. Do not use Dominion 2L with a termite bait system. A preferred non repellent to use with a termite bait system would be Termidor.
Most of the other commonly used pre-treat termiticide products are repellent, which means that termites avoid treated areas, but continue to search for gaps in the treat ment from which they can attack the structure.
Dominion 2L is applied at very low rates - up to 10 times lower than some other termite treatments.
The exterior perimeter labels of Dominion 2L allow you to focus your treatments where termite infestations are most likely to occur .
No inside treatments required unless there are active termite infestations found during inspection.
Less drilling required, compared to conventional treatments
Complete exterior perimeter treatment of the home required
Dominion 2L- 27.5oz.(724.6ml) bottle makes 50 gallons of solution at a .1% solution, 100 gallons at a .05%.
Both are labeled for prevention and control of :
and other wood infesting insects.
Read the product labels for a complete listing of insects.
after sufficient irrigation or rainfall has occurred so that uniformity of application will not be affected.
Dominion 2L Termiticide/Insecticide
PREVENTS AND CONTROLS SUBTERRANEAN TERMITES, AND CARPENTER ANTS
FOR USE ON TURFGRASS (INCLUDING SOD FARMS, LANDSCAPE ORNAMENTALS, FRUIT AND NUT TREES AND INTERIOR PLANTS CAPES.
FOLIAR AND SYSTEMIC INSECT CONTROL
ACTIVE INGREDIENT: Imidacloprid: 1-1 (6-Chloro-3-pyridinyl)methyl]-N-nitro-2-imidazolidinimine ...............................................21.4%
INERT INGREDIENTS: ..................................................................................................................................................................................