Cyonara 9.7 is the premier Lambda-Cyhalothrin formulation that combines an advanced generation pyrethroid with Sigma Technology. This new technologyhas a double effect. Sigma Technology reduces pares-thesia and, at the same time, offers long-lasting residual. This is different than encapsulated technology, as the micro-caps can rupture, possibly increasing paresthesia and decreasing residual.
Cyonara 9.7's broad label allows application to be made outdoors and indoors, in food handling and food prep establishments, institutional, public, commercial, agricutural, and industrial buildings, and in large perimeter areas.
Ants, Bed Bugs, Bees, Boxelder Bugs, Carpenter Bees, Carpet Beetles, Centipedes, Chiggers, Chinch Bugs, Cigarette Beetles, Clover Mites, Cluster Flies, Cockroaches(Larger) (For the smaller German cockroaches, use a high quality roach bait, Confused Flour Beetles, Crickets, Darkling Beetles, Earwigs, Elm Leaf Beetles, Firebrats, Fleas*exterior only, Flies, Hide Beetles, Lesser Grain Borers, Midges, Millipedes, Mites, Mole Crickets, Mosquitoes, Pillbugs, Red Flour Beetles, Rice Weevils, Sawtoothed Grain Beetles, Scorpions, Silverfish, Sowbugs, Spider Mites, Spiders, Termites*above ground only, Ticks, and Wasps
Cyonara 9.7 pest control achieves unsurpassed control of most pests within minutes, and offers a residual that can last up to several months, even at considerably low-use rates.
Labeled for outdoor perimeter pest control, indoors for food handling areas, turf & ornamentals, & animal housing.
Tank mix compatible with herbicides, insecticides, fungicides, & liquid fertilizers with great mixing characteristics.
Outdoor Surfaces Use
Perimeter Barrier Treatments
Description: STRUCTURAL AND PERIMETER PEST CONTROL CYONARA 9.7 is for use as a general surface (nonfood/nonfeed areas), crack and crevice, or spot treatment in, on, and around buildings and structures and their immediate surroundings, and on modes of transport. Areas of use include, but are not limited to, industrial buildings, houses, apartment buildings, laboratories, buses, greenhouses (non-commercial), stores, warehouses, vessels, rail cars, trucks, trailers, aircraft (cargo and other non-cabin areas only), schools, nursing homes, hospitals, restaurants, hotels, livestock/poultry housing, pet kennels, food granaries, food grain mills and food manufacturing, processing, and servicing establishments.
Nonfood/nonfeed areas of food/feed handling establishments include garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets, and storage (after canning or bottling). For indoor applications, CYONARA 9.7 can be reapplied at 21-day intervals if necessary.
Dilute CYONARA 9.7 with water for application using hand-held or power-operated application equipment as a coarse spray for crack and crevice or spot and general surface (non-food/nonfeed areas only) treatments. Application equipment that delivers low volume treatments, such as the Micro-Injector or Actisol applicator, may also be used to make crack and crevice or spot and general surface treatments. Fill applicator tank with the desired volume of water and add CYONARA 9.7. Close and shake before use in order to ensure proper mixing. Shake or re-agitate applicator tank before use if application is interrupted. Mix only amount of treatment volume as required. CYONARA 9.7 may be applied by using a paintbrush or other porous applicator attached to a handle as a general surface treatment
CYONARA 9.7 may be tank mixed with other currently registered pesticides unless expressly prohibited by the product label. A small volume mixing test with the other products is recommended to ensure compatibility. If other chemicals are added to the applicator tank, CYONARA 9.7 should be added last. If mixed with EC formulations, use within 24 hours. Fill tank to desired volume and continue to agitate while making applications. CYONARA 9.7 may be tank mixed with an Insect Growth Regulator (IGR). Observe all restrictions and precautions which appear on the labels of these products.
Ants: Apply to any trails around doors and windows and other places where ants may be found. For best results, locate and treat nests. Where ants are trailing inside, apply as a residual surface treatment to active areas such as baseboards, corners, around pipes, in and behind cabinets, behind and under refrigerators, sinks, furnaces and stoves, cracks and crevices. When combining baits and residua- surface insecticides, apply surface insecticides in cracks and crevices, along baseboards, and infested surfaces and outside barrier treatments. Use baits in other areas that are untreated by residual insecticides.
Bedbugs (bed bugs): Clean floors and surfaces by vacuuming. Apply as a coarse, low-pressure spray to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and to bed springs and bed frames. Do not apply to furniture surfaces or mattresses where people will be laying or sitting. Infested bedding should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperatures.
Cockroaches, crickets, earwigs, firebrats, silverfish, and spiders: Apply as a coarse, low-pressure spray to areas where these pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, cabinets, behind and under refrigerators, sinks, furnaces and stoves, the underside of shelves, drawers and similar areas. Pay particular attention to cracks and crevices.
Bees, flies, mosquitoes, and wasps: Apply directly to walls, ceilings, window screens, and other resting areas as a residual surface treatment. May be used inside residential buildings as well as in and around carports, garages, and storage sheds. Use caution when treating nests of stinging insects as Cyonara 9.7 does not provide instant knockdown. Protective equipment for the applicator may be required. For best results, treat bee, wasp, and hornet nests late in the day when most insects will be present. Allow 2-3 days fo the colony to die and repeat if necessary.
Carpenter bees: Apply coarse spray to thoroughly wet wood surfaces where bees have been previously active or to provide protection against further damage. Apply early in the spring to prevent bees from invading wood. When bees have infested wood, surface applications can help control embedded larvae and bees that emerge from the wood.
Pantry pests (i.e., carpet beetle, cigarette beetle, confused flour beetle, lesser grain borer, red flour beetle, rice weevil, and sawtoothed grain beetle): Apply to cupboards, shelving, and storage areas. Remove all utensils, uncovered foodstuffs (or any having original package opened), and shelf paper before making application. Allow treated surfaces to dry and cover shelves with clean paper before replacing any utensils, foodstuff, or other items. Any foodstuff accidentally contaminated with treatment solution should be destroyed.
Boxelder bugs, centipedes, millipedes, pillbugs, and sowbugs: Apply around doors and windows and other places where these pests may be found or where they may enter premises. Treat baseboards, storage areas, and other locations. Apply barrier treatments to prevent infestation as described below.
Fleas and ticks: To control nuisance fleas and ticks (e.g. dog ticks) apply to kennels, yards, runs, and other areas where pets may frequent. For best coverage to control ticks, apply using a coarse fan spray to vegetation brush, branches, rock walls, and other areas near habitation where ticks may harbor or frequent. Treat entire area rather than making spot treatments, and retreat as necessary to maintain control. Do not apply to pasture or cropland, and do not allow animals and people access to treated areas until the deposit has dried. Applications can begin in the spring and can continue until frost to control both larvae and adult ticks.
Cluster flies: Apply in late summer or early fall before flies are observed alighting on surfaces. Apply thoroughly on siding, under eaves, and around windows and doors, paying attention to south-facing surfaces, but do not allow runoff to occur. Heavy precipitation prior to frost may require retreatments to maintain protection. In winter and spring when flies become active and are emerging, interior crack and crevice and void treatments can help reduce the infestation, along with ULV or general surface application in infested attics or unoccupied lofts.
Litter beetles (darkling, hide, and carrion beetles) and flies In animal housing (such as poultry houses): To control adult litter beetles, apply CYONARA 9.7 to walls and floors at clean out, before reintroduction of animals. This will suppress beetles that escaped earlier treatment and will help delay onset of future infestations. Pay attention to areas where beetles frequently occur, such as walls, supports, cages, stalls, and around feeders.
To help control flies, apply a directed application to horizontal surfaces and overhead areas and allow to dry before reintroduction of animals.
Application Within Food Handling Establishments:
For places other than private residences in which exposed food is held, processed, prepared, or served including, but not limited to, areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing foods, edible waste storage, and enclosed processing systems (mills, dairies, edible oils, syrups), and serving areas: Use as a crack and crevice or spot treatment in and around both food and nonfood areas. Apply in small amounts directly into cracks and crevices, using equipment capable of delivering a pin stream of insecticide, in points between different elements of construction, between equipment and floor, openings leading to voids and hollow spaces in walls, equipment and bases. Food contact surfaces and equipment should be cleaned with an effective cleaning compound and rinsed with potable water before using. Limit individual spot treatments to an area no larger than 20% of the treated surface. Individual spot treatments should not exceed two sq/ft. Take extreme care that the product is not introduced into the air. Avoid contamination of food and food processing surfaces.
Application Within Food Serving Areas:
For facilities where foods are served, such as dining rooms: Apply as a crack and crevice or spot treatment to selective surfaces such as baseboards, under elements of construction, and into cracks and crevices. Avoid treating surfaces likely to be contacted by food. (Do not apply when facility is in operation or foods are exposed.) Food must be covered or removed in area being treated. Do not apply directly to food or allow applications to contaminate food.
NOTE: Application of this product in the food areas and/or food serving areas of food handling establishments other than as a spot and/or crack and crevice treatment is NOT permitted. Use of application equipment such as the Micro-Injector or Actisol applicator in food areas should be limited to crack and crevice treatment only.
Livestock/Poultry Housing Structures and Pet Kennels
Apply as a general surface (including directed sprays) and/or crack and crevice treatment. Control is enhanced when interior and exterior perimeter applications are made in and around the livestock, poultry, and pet housing structures. Normal cleaning practices of the structure also must be followed along with applications of CYONARA 9.7 to effectively control the crawling and flying insect pests listed in the table. For unoccupied areas of livestock barns or housing structures, apply to floors, vertical, and overhead surfaces where crawling or flying insect pests are or may be present. Feeders, waters, and feed carts should be covered before application to prevent contamination. Do not apply to milk rooms or feed rooms. Pay attention to animal areas including stanchions, pipes, windows and doors, and areas where insect pests hide or congregate. Exterior applications to south facing walls and foundation perimeters can help prevent interior infestations of flying and crawling insect pests.
For poultry houses, apply to floor area (birds grown on litter) or to walls, posts, and cage framing (birds grown in cages). Application should also be made into cracks and crevices around insulation. Reapply after each grow out or sanitation procedure. Indoor control can be enhanced by making perimeter treatments around the outside of building foundations to prevent immigrating adult beetles. Apply in a uniform band 1 - 3 ft. up and 2 - 6 ft. out from foundation. Maintaining a year-round treatment program will prevent background populations from reaching problem levels.
CYONARA 9.7 may be converted to a foam and the foam used to treat structural voids to control or prevent pests including ants, bees, termites (above ground only), wasps, or other arthropods harboring in walls, under slabs, or in other void areas.
Also includes B&G 1 Gallon Sprayer
B&G 10PV Dura Spray 1 Gallon Sprayer is a chemical resistant sprayer.This all poly sprayer is built to industrial standards and can be used with most chemicals. This Dura Spray-V Sprayer is a heavy duty sprayer at an economical price
ePestSolutions is a online pest control solutions provider with a host of pest control products which can be used for a wide variety of pest control applications. Some of which include bed bug control, ant control, cockroach control, flea control, spider control and many more.
Restrictions: Cyonara 9.7 CANNOT be shipped to CT or NY
|Average Customer Review: Not yet rated|
|Write an online review and share your thoughts with others.|
Q: i have sprayed an area affected by cockroaches this morning, they are all fleeing the area and dying, how long are the effects likely to last and when should i expect to stop seeing live ones?
A: Cyonara will last about 60 days after to spraying. How long it takes for completely clean out will depend on the level of infestation. Might be worth applying some roach bait, suck as Maxforce Magnum to the plumbing penetrations and areas that you have been seeing them. Bait usually works within 4 days for an huge reduction.