Product code: hurricane The Hurricane dispenses both oil and water-based products. The Hurricane is capable of dispensing disinfectants, deodorizers, germicides and insecticides. It is being used successfully in hospitals, restaurants warehouses nursing homes, schools, greenhouses and other institutions. With an adjustable output of 0-5 gallons per hour, this versatile unit gives you the power to handle both large and small area, wherever aerosol particle chemical treatment is needed.
Most chemicals, insecticides, fungicides, disinfectants and deodorizers will give their best results if applied in small droplets between 10 and 100 microns in size, according to chemical type. However, droplets in this size range are highly susceptible to being drifted long distances by wind. This is why most outdoor (agricultural) spraying is done using droplets of 200 to 400 microns. Where wind drift is advantageous, or in a closed building, smaller droplets can be utilized to maximize the efficacy of the chemical and reduce application costs. The smaller the droplet size the better the coverage. Is it necessary to fog your chemicals or can you use a sprayer? Well that depends really on how effective you want to be, fogging would be the best solutions but it is not always to the feasible.
What is a cool mist fogger? or Ultra-Low-Volume ( ULV) Cold Fog
A ULV sprayer generates fog droplets by using a high volume of air at low pressure. Such a system enables droplets of a more precise size to be generated. The absence of a large number of very small droplets will limit the penetration of the fog into highly obstructed areas.
ULV sprayers can dispense formulations in a more concentrated form since less diluent is required.
Also, the ability to be able to calibrate the machine to produce droplets of the optimum size for the type of chemical being used make ULV spraying the method of choice whenever possible.
But cost wise it is a great option and for most homeowners and commerical areas, this is the ideal system for use to control mosquitoes and other insects.
What is a Thermal Fogging
A thermal fogger is appropriately named since it is a device that uses heat to produce a fog without degrading the active ingredient.
A thermal fogger produces a range of droplet sizes including a large number of very small droplets.
This makes a thermal fogger the preferred type of equipment to reach air spaces in areas highly obstructed by vegetation, or other physical obstructions in buildings.
The large number of very small droplets produced in a thermally generated fog also make the fog highly visible. This can help the operator to monitor the fog and ensure thoroughness of application.
|Average Customer Review: Not yet rated|
|Write an online review and share your thoughts with others.|