Alpine pressurized insecticide is the only Reduced Risk* nonrepellent aerosol labeled for use against crawling and flying insects. There’s simply no better aerosol you can choose for your residential GPC customers than Alpine pressurized insecticide.
Introducing a Reduced Risk* nonrepellent aeorosol for ants, roaches, bed bugs and more.
Broad spectrum label for use against: ants, cockroaches, bed bugs, spiders and occasional invaders.
Alpine pressurized insecticide is part of a family of Prescription Treatment® brand Alpine® insecticides that also features Alpine ant and termite foam and Alpine dust. All three products contain the active ingredient dinotefuran, a new nonrepellent to the pest control industry that the EPA has granted reduced-risk status for public health use.
All Alpine formulations contain the active ingredient dinotefuran, a new nonrepellent to the pest control industry that the EPA has granted reduced-risk status for public health use.
Recommendations for Alpine Aerosol Insecticide
KILLS: Ants (including foraging Carpenter, Fire, Harvester and Pharaoh Ants), Asian Lady Beetles, Bed Bugs, Booklice, Boxelder Bugs, Clover Mites, Cluster Flies, Crickets, Dermestids, Drugstore Beetles, Earwigs, Elm Leaf Beetles, Flour Beetles (Red and Confused), Fruit Flies, German Cockroaches, Grain Weevils, Indianmeal Moths, Millipedes, Phorid Flies, Pillbugs, Powder Post Beetles, Silverfish, Sowbugs, Spiders (excluding Black Widow), Springtails and Trogoderma
FOR USE IN AND AROUND: Apartments, Campgrounds, Homes, Hospitals, Hotels, Motels, Non Food Areas (Meat Packing and Food Processing Plants, Restaurants, Supermarkets), Nursing Homes, Resorts, Schools, Transportation Equipment (Buses, Boats, Ships, Trains, Trucks, Planes†), Utilities, Warehouses, and other Commercial and Industrial Buildings
† Use in cargo areas only. Do not use in aircraft cabins.
Dinotefuran: N-methyl-N-[(tetrahydro-3-furanyl) methyl]guanidine . . . . . . .0.5%
OTHER INGREDIENTS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99.5%
EPA Reg. No. 499-531
SPOT TREATMENT: Use with the supplied actuator and injection tubes or other Whitmire Micro-Gen equipment. Hold container upright while spraying. Direct nozzle approximately 12’’ from surface to be treated. Apply directly on insects in these locations when possible. Reapply as necessary.
Alpine Aerosols Insecticide Can be used for Crack and Crevice Treatment
Crack and Crevice Treatments
Place injection tip into cracks, crevices, holes another small openings where insects may be harboring, living and breeding. For light infestations, move injection tip along cracks while treating at the rate of 3 ft/sec. For heavy infestations, move injection tip along at 1 ft/sec. For closed voids, calculate the void’s cubic area and treat at the rate of 1 - 5 sec/3 ft3. Several holes may be required in long-running voids. Reapply as necessary.
Alpine Aerosol Insecticide
CRAWLING INSECTS: Apply as a Crack & Crevice or spot treatment where insects are
harboring, traveling or breeding. Reapply as necessary. For example, openings around pipes and sinks, under refrigerators, pantries, behind baseboards, washing machines, stoves, cabinets, sewer, floor drains and meter boxes. In commercial areas, apply as a Crack & Crevice or spot treatment in office areas, stainless steel equipment, shelving, machinery, storage areas, pallets and other areas where insects may be harboring, traveling, breeding or entering the structure.
BED BUGS: Apply as a Crack & Crevice or spot treatment where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers, clothes closets and carpet edges, high and low wall moldings and wallpaper edges. Do not use this product on mattresses, pillows, bed linens or clothes. Remove all clothes and other articles from dressers or clothes closets before application. Allow all treated areas to dry thoroughly before use. Reapply as necessary. Not recommended for use as sole protection against bed bugs. If evidence of bed bugs is found in/on mattresses use products approved for this use.
NON FOOD AREAS: Includes areas such as garbage rooms, lavatories, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage areas (after canning or bottling), serving areas (when no food is present). Apply as a Crack & Crevice treatment or spot treatment to selective surfaces such as baseboards, under elements of construction, stainless steel equipment, shelving, machinery, storage areas, pallets, tables, chairs and other areas where these insects may be harboring, traveling, breeding or entering the structure.
Reapply as necessary
INDOOR AND OUTDOOR TREATMENTS TO KILL FORAGING CARPENTER ANTS:
Locate suspected infestation and/or insect tunnels and cavities. Drill pilot holes into insect tunnels, galleries and inaccessible closed voids. Drill holes 8 - 10’’ apart. Inject 5 - 10 sec/per hole. Foraging carpenter ants must be directly contacted at time of application to be effective.Must be directly contacted at time of application for effective carpenter ant control.
Contact as many ants as possible to get the best ant control. Non-residual treatment. Reapply as needed. Do not contact electrical wiring, plumbing, etc. when drilling and never use metal wood injectors where electrical shock could occur. Use a Whitmire
Micro-Gen standard plastic void injector if there is danger of electrical contact.
ASIAN LADY BEETLES, BOXELDER BUGS, ELM LEAF BEETLES, CLUSTER FLIES AND CLOVER MITES: Apply as a Crack & Crevice or spot treatment where these insects may be harboring, traveling, breeding or entering the structure. For example, behind siding, wall voids, around windows and door frames.
Reapply as necessary.
CONTROL OF FRUIT AND PHORID FLIES: Treat cracks, crevices, voids, holes and small openings where these insects may be harboring, traveling, breeding or entering the structure as adults or larvae. Pay particular attention to breeding sites and areas containing debris. Spot treatment to surface resting sites not associated with food or food preparation areas, of the adults, is permitted. Treatment of the catch basin area of drains is permitted. Crack &
Crevice or spot treatment to the walls under manhole covers is also permitted. Do not spray product directly down into drains or sewers.
Reapply as necessary.
Alpine Aerosol Insecticide
TREATMENT OF THE STRUCTURE FROM
THE OUTSIDE: Treat where listed insects may be harboring, traveling, breeding or entering the structure. For example, weep holes; under siding; wall voids; soffits; around attic vents; cracks and crevices; openings around windows, doors and pipes and landscape timbers. Treatment of infested fences and tree holes is permitted. Direct treatment of ant trails is permitted.
CONTROL OF ARGENTINE ANTS: To treat nests, inject the nest at 3 - 6 sites at a rate of 5 - 10 sec/ site. For very large nests (over 12” diameter), increase the number of injection sites. Space injection sites in a circular pattern on the nest surface with 1 site in the center. To quiet active ants on nest surface, sweep surface with insect spray from a distance of 12’’. Treat new nests as they appear.
TO KILL FORAGING CARPENTER ANTS
LIVING INSIDE TREES: Determine the highest and lowest elevation of the colony. Drill holes into colony at highest elevation and inject 5 - 10 sec. Do the same for lowest elevation. Drill intermediate holes every 4 ft between the upper and lower elevations if required. Foraging carpenter ants must be directly contacted at time of application to be effective. Contact as many ants as possible. Non-residual treatment. Reapply as needed.
TO KILL FORAGING CARPENTER ANTS IN STUMPS, UTILITY POLES AND FENCES:
Treat open holes or drill horizontal holes in a circular pattern where insects are suspected. Inject 2 - 5 sec of product/hole. Foraging carpenter ants must be directly contacted at time of application to be effective. Contact as many ants as possible. Non-residual treatment. Reapply as needed.