Protecta Pest Monitor is a reusable, plastic monitoring box used with Protecta MC Glue boards (sold separately) to monitor for both mice and insects. Basically the monitor gives you a tamper-resistant glue board station that will catch anything from mice to spiders and other creepy crawlies. Just place the glue board in the Pest Monitor's base and use the clips to hold the glue board firmly in place. Insects can access Protecta Pest Monitor from holes on all four sides. Mice enter through the two larger holes that are close to the wall. To block mice from entering the monitor, you may simply rotate Pest Monitor's top, covering the two larger holes and preventing entry. One protecta key is included to open the stations.
For monitoring insects and mice, place a TRAPPER MC Glue Trap in the base, using the clips to hold the glue trap firmly in place. Insects can access Pest Monitor from holes on all four sides. Mice enter through the two larger holes that are adjacent to the wall. To prevent mice from accessing Pest Monitor, rotate the top, covering the two larger holes.
Mounting holes on the bottom of TRAPPER Pest Monitor make servicing easy when the Monitor is secured. Pest Monitor opens with Bell's unique 2-prong key. With its low profile, TRAPPER Pest Monitor fits under objects or can be used on its side in a narrow opening.
|Average Customer Review: Not yet rated|
Write an online review and share your thoughts with others.
1.)Unlock Top From Base With TRAPPER 2- Prong Key
To Monitor For Mice And Insects
1.)Place TRAPPER MC Glue Trap Under Tab On Base
2.)Position Glue Trap So That Glue Free Edge Is Along Mouse Runway.
1.)Reattach Lid By Inserting Tabs From Top Into Slots On The Base. Snap Shut.
To Use As Insect Monitor Only
1.)Rotate Top 180 Degrees So That Mouse Entry Holes Are Blocked.
Place TRAPPER Pest Monitors Wherever Insects And Mice Travel:
Indoor, Under Pallets, And Shelves, Inside Cupboards and Along Walls;
Or Outdoors Along The Perimeter Of Buildings.