Totality Wood Treatment from FMC Professional Solutions is a new wood treatment that provides pest management professionals with formulation and application efficiencies which can help improve the profitability of their wood treatment programs when compared to competitive products.
Totality Wood Treatment creates an effective and treated barrier to the structure by either pre-treating the wood structural or treating the lumber once it has been installed by spraying, brushing, or foaming applications. Total coverage of the wood must be completed for optimal insect wood-destroying control.
Applying Totality Wood Treatment to both wood and wood based products will protect those treated products from damage for up to 2 years from carpenter ants, subterranean termites, drywood termites, formosan termites, ambrosia beetles, deathwatch beetles, false powder-post beetles, powder-post beetles, old-house bores and others.
Totality saves you time and money per job because only 1 coat is required versus 2 coats for borate products. Treated wood was found to have 2,800 ppm of bifenthrin after 6 years and was detected up to a depth of 8mm (5/16").
Target pests: Totality Wood Treatment is used for the control of drywood and subterranean termites (including formosan termites), carpenter ants, carpenter bees, ambrosia beetles, powder-post beetles, falsepowder-post beetles, deathwatch beetles, old-house borers, and others in wood-in-place.
Totality Wood Treatment is for use in structures including residential, institutional, public, commercial, and industrial buildings.
If Totality Wood Treatment is used at the recommended rate of concentration (0.6%) each quart size bottle will make up approximately 10 gallons of material.
Totality Wood Treatment will begin to eliminate existing issues within hours but total control may take a couple days depending on insects feeding schedule and is used also as a preventative to keep insects from being able to ingest the wood in which is treated.
Restrictions: CA, FL, KY, LA, NC, NY
|Average Customer Review: Not yet rated|
Write an online review and share your thoughts with others.
For best results, apply Totality Wood Treatment solution to dry wood. Wood absorbency of Totality will vary on the wood species, relative moisture, and degree of sapwood in the wood being treated.
If making a surface application using Totality Wood Treatment it should be applied at a minimum rate of 8.0 oz. per 2.5 gallons of water (0.6% wt solution) to the point of surface saturation and up to the point of runoff so that it meets or exceeds the minimum final wood residue and meets or exceeds the minimum requirements of 50mg Bifenthrin/m2.